…hard-elastic &
resistant to weathering and ageing
DIAMANT flexcoat is a permanent elastic 2-component-coating system based on polymers. DIAMANT flexcoat is very wear resistant due to its perfect filler combination. DIAMANT flexcoat is availble in the colours red and grey for an easy detection of pre-coats.
DIAMANT flexcoat has been successfully used for >30 Jahren globally in hard industrial fields and is preferred because of its high resistancde values and its long life.
Typical Applications
Corrosion protection, coatings and self levelling top coats for:
- tanks, containers and silos
- pipelines, stopvalves and valves
- pumps and welded constructions
- hydrotechnical plants
- ship superstructures
- crane superstructures
Pack Sizes
- 100g, 250g, 500g, 1.000g
- large packs on rfequest
Technical Data:
- Thermal Loads
permanent to 120°C - Pot Life
at 5°C approx. 3 hours - Cure Time
24 hours - Contactcorrosion
none
| Typ* | Product- No. |
Spec. Resistance [Ω cm] |
E-Modulus [N/mm²] |
Spec. Weight [g/cm3] |
Heat Transfer (25,6°C) [W/mK] |
Hardness [Shore A] |
| Rapid P = Putty | 0998 | 5,1 × 1012 | - | - | 0,5 – 0,7 | 70 |
| FL = fluid red | 0997 | 5,1 × 1012 | 1050 | 1,35 | 0,55 – 0,7 | 70 |
| FL = fluid grey | 1075 | 5,1 × 1012 | 1050 | 1,35 | 0,55 – 0,7 | 70 |
All material values are average values and may vary on ground of volumes and ambient conditions. These values are based on standard conditions (STP) of 20°C (273°K) and 1013mbar.
