MM 1018 – Variations
DIAMANT MM1018 is a physically very high loadable metal polymer to produce 100% formtrue and forcefit gap compensation in steel constructions having high values even under extreme conditions like vibrations or temperature changes between – 40°C to +90°C and adds considerably to an improved stiffness. DIAMANT MM1018 has an excellent weather resistance and is easy to use in place..
Properties
- 100% gap compensation from approx. 0 – 10 mm, NO MEASURABLE
SHRINKAGE - high compressive strength
- improved stiffness
- vibration dampening
- temperature resistant from approx. – 40°C to +90°C
- weatherproof
- corrosion resistant
- non conductive
- resistant to gasolines, oils, coolants and environmental influences
- easy to apply in place without special preparation and auxiliaries
Typical Applications
- Installation of bridge bearings
- Gap compensation in face plates of steel constructions
- undercoating of support columns, rails and presses, rails in flood gates
- undercoating of faceplates and double discs for new installation
Pack Sizes
- 100g, 1.000g, 1.500g, 4.500g
- Large packs on request
Technical Data / – Values:
- Thermal Resistance
permanent – 40°C to +90°C - Coeff. of static friction
>0,5 - Resistance to Chemicals
very good - Shelf Life
min. 12 monaths
| Typ* | Product- No. |
Tensile- Strength [N/mm²] |
E-Modulus [N/mm²] |
Spec. Weight [g/cm3] |
Compressive Strength [N/mm²] |
Cure- time [Std.] |
Pot- life [Min.] |
| P | 1436 | 76 | 14000 | 2,4 | 160 | 24 | 34 |
| FL slow | 1866 | 71 | 12000 | 2,4 | 140 | 36 | 120 |
| P slow | 2041 | 76 | 14000 | 2,6 | 140 | 36 | 100 |
* FL = liquid / P = paste
All material values are average values and may vary by volume and ambient conditions. These values refer to standard conditions (STP) of 20°C (273°K) and 1013mbar.
