DIAMANT ultrametal Variations
Not a Poem, but real:
Often copied, even by ‘friends’,
real only with our DIAMANTs!
therefore before connect,
the real DIAMANT UM must be checked .
When welding was losing ,
where metals have been oozing,
where professionals gave up despairing,
DIAMANT ultrametal did the job, daring.
DIAMANT ultrametal Products…
for extreme loads when maintaining in industries and crafts. High metalic fillers, machineable like the parent metal.
Pack Sizes
- twin packs A + B
- 100g, 250g, 500g, 1.000g, 1.500g
- large packs on request
Properties
- resistant even against hard chemical and physical influences
- machineable like metal: file, mill, turn, bore, thread cutting and polishing *)
- The metal character is achieved by the use of up to 90% metallic fillers
- Lowest possible shrink, thus ideal for larger areas
- Longe pot life, short cure
- High mechanical strengths
- world wide in use since the early 1950s
- Temperature Resistance
permanent = -32 to 160°C
peak = 350°C
exception: Ceramic-Stahl peak = 280°C - Pot Life (20°C) = 60 minutes
exception: Ceramic-Stahl = 45 minutes - Cure (20°C) = 24 hours
exception: Ceramic-Stahl = 20 hours - Shrink on Cure
hardly measurable.
| Product | Type * | Product- No. |
Spec. Weight [g/cm³] |
E-Modulus DIN 53457 [N/mm²] |
Pressure- Strength [N/mm²] |
Tensile- Strength [N/mm²] |
Bending- Strength [N/mm²] |
Shear- Force [N/mm²] |
Impact- Strength [N/mm²] |
Hardness [Shore D] |
| Steel | P = paste | 0666 | 2,3 | 6000 | 160 | 76,0 | 89,0 | 22,0 | 5,2 | 89 |
| FL = fluid | 0664 | 2,1 | 6000 | 156 | 76,6 | 87,0 | 22,5 | 5,0 | 87 | |
| Cast Iron | P = paste | 1343 | 2,3 | 6000 | 160 | 76,0 | 89,0 | 22,0 | 5,2 | 89 |
| FL = fluid | 1960 | 2,2 | 6000 | 156 | 76,6 | 87,0 | 22,5 | 5,0 | 87 | |
| Aluminium | P = paste | 1906 | 2,0 | 5800 | 145 | 72,0 | 82,0 | 18,5 | 5,4 | 87 |
| FL = fluid | 1341 | 1,9 | 5800 | 141 | 72,5 | 82,5 | 18,7 | 5,2 | 88 | |
| Bronze | P = paste | 1114 | 2,2 | 5800 | 155 | 62,0 | 79,5 | 16,5 | 5,4 | 86 |
| FL = fluid | 1137 | 2,1 | 5800 | 159 | 62,5 | 80,0 | 16,6 | 5,2 | 84 |
The following Diamant UM variations are filled with different ceramic fillers giving the coated areas an enormous wear resistance and also against aggressive media.
| Product | Type * | Product- No. |
Spec. Weight [g/cm³] |
E-Modulus DIN 53457 [N/mm²] |
Pressure- Strength [N/mm²] |
Tensile- Strength [N/mm²] |
Bending- Strength [N/mm²] |
Shear- Force [N/mm²] |
Impact- Strength [N/mm²] |
Hardness [Shore D] |
| Ceram | P = paste | 1231 | 2,5 | 6500 | 180 | 74,0 | 88,0 | 23,0 | 5,8 | 92 |
| FL = fluid | 1233 | 2,05 | 6500 | 176 | 74,5 | 88,5 | 23,5 | 5,6 | 89 | |
| Ceramic- Steel |
P = paste | 1342 | 2,1 | 5100 | 170 | 72,0 | 84,0 | 21,0 | 5,8 | 92 |
All material values are average values and may vary on ground volumes and ambient conditions. These values are based on standard conditions (STP) of 20°C (273°K) and 1013mbar.
*) DIAMANT UM Ceram limitedly machineable
