Renovation of complicated,
thin-
walled flexible
elements
DIAMANT diaflex 371 R is a thin liquid, cold curing 2 component elastomeric system. DIAMANT diaflex 371 R is perfect for applications in machine building due to its very high wear, tensile and tear strengths as well as a very good resistance to oils, grease and coolants- The low viscosity of DIAMANT diaflex 371 R allows for the production of thin-walled parts.
Worldwide in successful use for over 40 years.
PROPERTIES
- lows processing viscosity
- high resistance to wear, tensile and tear loads
- very good fresistance to oils, grease and coolants
- cold curing
Typcial Applications
Production of elastic
- seals, seal profiles, wipers, tool holders,
- wear-resistant coatings
Pack Sizes
- 50g, 100g, 500g, 1.000g
- Large packs on request
TECHNICAL DATA / VALUES:
- Thermal Resistance
permanent between -50° to +100° C - Colour
light brown
(other colours possible on request)
| Typ* | Product- number |
Density [g/cm] |
Tensile strength [mPas] |
linear shrinkage [%] |
Elongation [%] |
Severity [Shore A] |
| diaflex 371 R | 1512 | 1,1 | approx. 8 | 0,1 | approx. 800 | approx. 75 |
* FL = fluid / P = paste
*All mterial values are average values and may vary on ground of volumes and ambient conditions. These values are based on standard conditions (STP) of 20°C (273°K) and 1013mbar.
