dichtol AM Makro Spray

Very low-viscosity high-performance polymer for infiltration, impregnation and sealing

49,87 € incl. VAT.

plus shipping costs

41,91 € excl. VAT.

Item number: #2570

EAN: 4262367790109

Product group: dichtol

Additional information

Weight	0,62 kg

dichtol AM Makro Spray is a ready-to-use impregnation system based on a special polymer formulation. By using the practical spray can, dichtol AM Makro Spray enables simple and reliable impregnation of leaking components. Large pores (from 0.1 to 0.5 mm) can be sealed. This enables high pressure tightness, even with difficult object structures. In the case of locally known leaks, spot impregnation ensures efficient use of material. The direct application on site also eliminates long waiting and delivery times.

Properties

License for 3D printing
Efficient material consumption
Temporary corrosion and transport protection
Tested for drinking water and foodstuffs
(Hygiene Institute Gelsenkirchen)
Typical applications

Capillary-active deep impregnation of micropores, hairline cracks and porosities
Selective serial impregnation
Individual impregnation (of large components)

Storage / Shelf life

Store in the original, unopened container in a dry, cool and frost-free place (+5°C to +20°C). Shelf life 5 years.

Processing / Preparation

Dirt residues, foreign bodies, grease and other substances must be completely removed from the pores to be sealed. We recommend the use of DIAMANT Cleaner #1417 for this purpose.

Application

The object or application temperature should not exceed 40°C, otherwise the penetration of the polymer cannot be 100% guaranteed.

Spray

Apply dichtol in 4 steps at intervals of approx. 1 minute and keep the surface wet for at least 5 minutes. This allows dichtol to penetrate deep into the pores.

Curing

dichtol AM Makro Spray dries physically in a few hours (approx. 1 hour per mm wall thickness). Due to the fast drying of dichtol, it is possible to use the components again after a short time.