dichtol HS-EP

dichtol HS-EP is a 2-component impregnation system with a high solids content and high chemical resistance.

from 115,75 € incl. VAT.

97,27 € excl. VAT.

Item number: #2616

Product group: dichtol

Additional information

Gebindegröße	500 ml, 1 Liter

dichtol HS-EP is a 2-component impregnation system with a high solids content and high chemical resistance. dichtol HS-EP can also be used to seal warm objects or TS coatings with surface temperatures from 10°C to 120°C. The cured product is clear and colourless with a hard surface.

Storage / shelf life
Store in the original, unopened container in a dry, cool and frost-free place (+5 °C to +20 °C). Shelf life 1 year.

Preparation
The pores to be sealed must be clean and dry. Make sure that there are no dirt residues or foreign bodies (e.g. crack sealant) in the pores, as these can negatively affect the penetration behaviour of the sealer. We recommend DIAMANT Cleaner #1417 for cleaning dirty surfaces.

Application
The object temperature should not exceed the application temperature of 120 °C, as otherwise the penetration of the polymer cannot be 100% guaranteed! If necessary, weigh the two material components in a clean container in the correct mixing ratio and mix well, or mix the supplied container completely.

Brushing & spraying
Apply dichtol evenly in about 4 working steps at intervals of about 1 minute and keep the surface moist for 10 minutes. This allows dichtol to penetrate deep into the pores.

Injecting
Inject dichtol e.g. into a drilled hole (or similar) and leave to work for 10 minutes. If necessary, siphon off/pour out excess material after the exposure time.

Dipping
Completely immerse the component to be treated in dichtol. After an exposure time of approx. 10 minutes, the component can be removed from the container.

Curing
dichtol dries out under room conditions. The drying times can be found in the table with the technical data. Curing can be accelerated by temperature.