Very low-viscosity high-performance polymer for infiltration, impregnation and sealing
102,61 € incl. VAT.
(102,61 € / l)
plus shipping costs
Weight | 1 kg |
---|---|
Container size | 1 Liter |
dichtol HTWG Hydro is a ready-to-use, water-based 1-component system for the impregnation of metals and TS coatings. The simple and versatile application (dipping, brushing, injecting, spraying) enables reliable impregnation even on complex components.
Properties
Very high temperature resistance up to +700°C
Efficient material consumption
Wide range of applications (dipping, brushing, injecting, spraying)
Selective series impregnation / individual impregnation (of large components or surfaces)
Low investment costs
Colorless
No heat treatment required to achieve high temperature resistance.
Application
The object temperature should not exceed 40°C, otherwise 100% penetration of the sealer cannot be guaranteed.
Brushing and spraying:
Apply dichtol in 4 working steps at intervals of approx. 1 minute and keep damp on the surface for 5 minutes. This allows dichtol to penetrate deep into the pores
Injecting
Inject dichtol into the blind hole (or similar) and leave to work for 5 minutes. If necessary, siphon off / pour out excess material after the reaction time
Immersion
Completely immerse the component to be treated in dichtol. After an exposure time of approx. 10 minutes, the material can be removed from the container.
Storage / Shelf life
Store in the original, unopened container in a dry, cool and frost-free place (5°C to -+20°C). Shelf life 12 months.
Processing / Preparation
Dirt residues, foreign bodies, grease and other substances must be completely removed from the pores to be sealed. We recommend the use of DIAMANT Cleaner #1417 for this purpose.
Application
The object or application temperature should not exceed +40°C, otherwise the penetration behavior of the polymer may be reduced.
Brushing & spraying
Apply dichtol in 4 steps at intervals of approx. 1 minute and keep the surface wet for 5 minutes. This allows dichtol to penetrate deep into the pores
Injecting & filling
Inject dichtol into the blind hole (or similar) and leave to work for 5 minutes. If necessary, siphon off / pour out excess material after the reaction time
Immersion
Completely immerse the component to be treated in dichtol. After an exposure time of approx. 10 minutes, the material can be removed from the container.
Curing
dichtol dries physically at room temperature in 48 hours
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationDIAMANT Polymer GmbH
Marie-Bernays-Ring 3a
D – 41199 Mönchengladbach
Phone: +49 2166 9836-0
Fax: +49 2166 83025
Our offer is aimed exclusively at entrepreneurs and tradespeople.
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from TrustIndex. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information