dichtol WF 49 Concentrate

Storage / Shelf life

Shelf life at 15°C to 30°C: 6 months in sealed containers, store in a dry place. Avoid temperature fluctuations at all costs, as it is sensitive to moisture! If dichtol WF 49 comes into contact with moisture, it should no longer be used. Color change can occur with heat and UV radiation: Transparent/clear up to yellowing. These changes generally have no influence on the technical quality of the product.

Processing / Preparation

Mix dichtol WF 49 well with Diamond Thinner #1285 in the desired setting variant. Dirt residues, foreign bodies, grease and other substances must be completely removed from the pores to be sealed. We recommend the use of DIAMANT (#1417) for this purpose.

Application

The object temperature should not exceed 40°C, otherwise 100% penetration of the polymer cannot be guaranteed.

Brushing & spraying

Apply dichtol in 4 steps at intervals of approx. 1 minute and keep the surface wet for at least 5 minutes. This allows dichtol to penetrate deep into the pores.

Inject

Inject dichtol into the blind hole (or similar) and leave to work for 5 minutes. If necessary, siphon off/pour out excess material after the reaction time.

Immersion

Completely immerse the component to be treated in dichtol. Remove the component after an exposure time of approx. 10 minutes.

Curing

dichtol WF 49 is a chemically setting product that cures at temperatures of 5°C to 35°C at a relative humidity of 35% to 85%. Physical curing is achieved after a short time. Full chemical resistance is achieved after a short time. Full chemical resistance is achieved after 7 days.