ultrametal SMART Rapid

Roughen the bonding surfaces and clean them with DIAMANT Cleaner (item no. #1417). The surface must be free of grease, dry and clean.

Mixing
Use without mixing coil:
Squeeze the required amount out of the cartridge and mix thoroughly in a separate container.

Use with mixing coil:
Discharge the material above the mixing screw and discard the first 2-3 cm. Then begin application.

Curing
The treated surfaces can be used for light loads after 18 hours. After 24 hours, the surface is completely hardened and can be

used for full loads.